Chapter 11 - pages 11-1 to 11-7
General Purpose Tools and Wrenches
1–7
View ↗Archive / FAA Aviation Maintenance References
FAA-H-8083-30B
Aviation Maintenance Technician Handbook: General - Chapter 11
A text-only, source-linked reader for Chapter 11: Hand Tools & Measuring Devices. Diagrams and photographs remain in the official source PDF.
Source PDFFAA-H-8083-30B, Chapter 11 (2023), linked directly to its existing public host.
Open source PDF ↗Start reading
Read by chapter
Need a definition?Jump directly to this manual’s glossary of technical terms.
Document map
Sections identified from the available source record.
Chapter 11 - pages 11-8 to 11-13
Metal Cutting, Drilling, and Reaming Tools
8–13
View ↗Chapter 11 - pages 11-14 to 11-18
Taps, Dies, and Layout Tools
14–18
View ↗Chapter 11 - pages 11-19 to 11-24
Calipers, Micrometers, and Vernier Scales
19–24
View ↗Chapter 11 - pages 11-25 to 11-26
Slide Calipers and Measurement Practice
25–26
View ↗Recovered historic locations
Old InfoDot URLs mapped to a real section in this source.
Edition records
Source record
FAA-H-8083-30B, Chapter 11 (2023)
- Source location
- Reference landing page ↗
- Record note
- Text approved; original figures and photographs are not reproduced.